WalkLAB Microprocessor pH meter TI9000

WalkLAB Microprocessor pH meter TI9000 Ease of use Automatically locks reading when a stable reading is established. This feature can be disabled to allow continuous reading display. Automatic shut-off Meter automatically shuts off after 5 minutes after the last key command. This feature can be disabled while reading in continuous read mode. One-touch calibration The meter’ s one-touch auto-calibration procedure uses only one button to activate the mode. The unit will prompt and confirm offset and slope point calibration. Specifications pH mV Temperature Range: 0 to 14 pH ± 999 mV 0 to 100° C Display Resolution: 0.01 pH 1 mV 0.1° C Accuracy ( machine only) : ± 0.01 pH ± 1 mV ± 0.5° C Temperature compensation: Automatic or manual from 0 to 100° C Operating Temperature: 0 to 50° C Operating humidity: Maximum 90% relative humidity Slope recognition: ± 20% at pH 4 and pH 10 Offset recognition: ± 60 mV at pH 7 Input impedance 10¹ ² ohms Battery type: DC9V ( 1604A, 6LF22 or equivalent) Battery life: Approximately 200 hours Size: 164 x 83 x 35mm Weight: 350gm ( main unit including battery) Order Code Standard Accessories WalkLAB Microprocessor pH Meter TI9000 1. Main instruments 2. PE03 - Epoxy body combination pH electrode 3. TP200 -pH microprocessor temperature probe ( Stainless steel) 4. 7010 - Buffer solution pH7.00 90ml 5. 4010 - Buffer solution pH4.01 90ml 6. Carrying case 7. Operation manual Order Code Optional Accessories PE03 Epoxy body combination pH electrode ORP106 Epoxy body combination ORP platinum electrode TP200 pH microprocessor temperature probe 7010 Buffer solution pH7.00 90ml 4010 Buffer solution pH4.01 90ml 1010 Buffer solution pH10.01 90ml