Automatic Density Meter ( Pycnometer) Quantachrome model Ultrapyc 1200e

For laboratories with fewer density analysis needs, the single sample station Ultrapyc 1200e gas pycnometer provides the same ease of operation and high performance as the Pentapyc, with the additional option of vacuum purge ( vacuum pump not included) . Sample cells are supplied in durable stainless steel as standard. All cells are also available in aluminum. Non-elutriating cells are available for fine powders. Gases Used: Ultrahigh purity compressed gas regulated to a pressure of 20 psig ( see accessories) . Helium is recommended. Nitrogen or SF6 are suitable alternative gases for helium-permeable materials. Any other non-corrosive dry gas may be used for special applications. Purge Modes: Continuous flow for solids, pulse mode for powders, or evacuation. Evacuation mode not available on Pentapyc 5200e. Flow Rates: User selectable with precision needle valve( s) . Precision: Digital pressure display resolution of 0.0001 pounds per square inch ( psi) . Calibration: Stainless-steel spheres standard; NIST traceable values optional. Each instrument supplied with a full set of spheres housed in protective, padded wooden box.( micro-Ultrapyc 1200e is suppied with those shown in parentheses) Small, 7.070 cm3, 2 spheres ( nano, 0.09cm3, 1 sphere) Medium, 28.958 cm3, 1 sphere Large, 56.559 cm3, 1 sphere ( micro, 1.073cm3, 2 spheres) Connections: Ethernet port for PC, 2 x USB for printer and thumb drive. RS232 for electronic balance. ( PC, printer & balance not included; USB thumb drive included.) Power: 100-240 V; 50/ 60 Hz