Detail Pressure Vessels
Pressure Vessels
• Stainless Steel Type 304 or 316L
• 1 gallon to 10 gallon sizes ( 3.8 to 38 liters)
• Standard or Wide Mouth openings available for
ease of cleaning
• ASME certified: a certificate of analysis is available
upon request
• Electropolished finish provides a smooth, releasable,
cleanable surface
• Disassemble completely for thorough cleaning
• Molded rubber base protects the vessel against rough
handling ( available with steel base for continuous
operation at high temperatures)
• Use under positive or negative pressure
• Optional vacuum closure available when working with
negative pressure or when operating at low pressures
( < 30 psi/ 2.1 bar) or with stiffer O-rings ( FPM)
• Special orders available ( coatings, additional sizes)
APPLICATIONS
• Contain process fluids for filtration through pressure
type membrane filter holders
• Type 316/ 316L stainless complies with current good
manufacturing practices and are recommended for low
pH and high salt applications
Materials:
Vessel Type 304 or type 316L stainless steel
Skirt: 1 – 5 gallon Molded neoprene rubber
Skirt: 8 – 10 gallon Stainless steel
Connections:
Inlet/ outlet 1/ 4" NPTF
Standard closure 3 7/ 8" x 3 1/ 4"
Wide mouth closure 5 7/ 8" x 4 7/ 8"
Pressure:
Max. operating See table below
Optional relief valve 0.69 MPa ( 100 psi)
Max. negative 95 kPa ( 29" Hg)
Temperature:
Max. operating See table below
Volume:
U.S. gallons 1 gal 3 gal 5 gal 8 gal 10 gal
Liters 3.78 L 11.3 L 18.9 L 30.2 L 37.8 L
Dimensions:
Overall height 21.6 cm 38.7 cm 57.2 cm 52.9 cm 63.4 cm
8.5" 15.25" 22.5" 20.8" 24.9"
Inside diameter 22.9 cm ( 9" ) 30.5 cm ( 12" )
Weight: 3.6 kg 5 kg 6.8 kg 11.1 kg 12.5 kg
8 lb 11 lb 15 lb 24.5 lb 27.5 lb
Recommended for use with:
" Pressure Filter
Holders" KS 90 KS 142 KS 293
KS 90 ST KS 142 ST KS 293 ST
KS 90 UH KS 142 UH KS 293 UH
MAXIMUM OPERATING TEMPERATURE AND PRESSURE
" Type of
Stainless Steel" " Maximum Operating
Temperature" 1, 3, 5 gallon models 8 and 10 gallon models
Standard Opening Wide Mouth Standard Opening Wide Mouth
° F ° C psi MPa psi MPa psi MPa psi MPa
Type 304 100 38 175 1.21 140 0.97 130 0.90 129 0.89
150 66 170 1.17 135 0.93 130 0.90 125 0.86
200 93 165 1.14 130 0.90 120 0.83 120 0.83
250 121 160 1.10 13 0 0.90 120 0.83 115 0.79
300 149 155 1.07 125 0.86 115 0.79 110 0.76
Type 316L 100 38 155 1.07 130 0.90 115 0.79 115 0.79
150 66 155 1.07 130 0.90 115 0.79 115 0.79
200 93 155 1.07 130 0.90 115 0.79 115 0.79
250 121 155 1.07 1 30 0.90 115 0.79 110 0.76
300 149 150 1.03 125 0.86 110 0.76 110 0.76
ORDER ING INFORMATION
Complete Assemblies
Standard opening Wide Mouth opening
Type Stainless Steel ( SS) 304 SS 316L SS 304 SS 316L SS
Capacity:
1 gallon 720140 720160 740140 740160
3 gallon 720340 720360 740340 740360
5 gallon 720540 720560 740540 740560
8 gallon 730840 730860 740840 740860
10 gallon 731040 731060 741040 741060
Optional Parts and O-rings
Standard opening Wide Mouth opening
Standard closure ( 316 SS) 720162 740162
Vacuum closure ( 316 SS) 720152 740152
O-ring ( EPR) 2 720001 720019
O-ring ( FPM) 720015 720021
O-ring ( PTFE encapsulated silicone rubber) 720020 720018
Accessories
1/ 4" NPT Type of stainless3 Catalog No.
Vent/ relief valve: 7 kg/ cm2, 100 psi Male 304 SS 301825
Pressure gauge4: 0 – 160 psi Male 720002
Hose barb ( 11 mm) Male 304 SS 304507
Hose barb ( 11 mm) Female 304 SS 304508
Pipe plug Male 304 SS 313012
Elbow fitting Male/ Female 316 SS 720003
Ball valve Male/ Female 316 SS 720004
Close nipple Male/ Male 316 SS 720005
Quick-connect body Male 316 SS 720006
Quick-connect stem ( hose barb) - 316 SS 720007
Tampilkan Lebih Banyak